Peugeot 308 Key Fob Problems and How to Fix Them
If your Peugeot key fob suddenly stopped working it could be because of an inoperative battery for the coin-cell or water damage, receiver module problems, or a damaged chip. These are all easy solutions and you'll be able to get your car back up to speed in no time!
The blade of the key can get worn-out and cause a malfunctioning car key. You can easily fix this problem by visiting your local Car Key Man Auto Locksmith to have a new blade fitted.
Battery
The key fob on your Peugeot 308 may die or become weak enough to not send a clear signal. This can cause the key fob's function to cease and prevent you from locking and opening the doors or even starting your engine. You'll need a new battery for the key fob in order to fix this.
You'll have to purchase batteries for replacement from an auto parts store or a local hardware store. When you purchase the battery, ensure that it's new and hasn't sat on the shelf for a long time. A fresh new battery will have greater capacity and will also be able to send a more powerful signal to the car.
After replacing the battery, try unlocking and locking the doors of your Peugeot by using the key fob. If the doors don't unlock, the problem is likely with the car's receiver module which can be programmed by your local Peugeot dealer.
It's possible that the key fob's internal chip is damaged. You could damage your key fob if you drop it on the ground or expose it to moisture. The rubber seals that protect the chip from moisture could get worn out over time, particularly if the key fob is exposed to water for extended period of time, like when you submerge it in the ocean at the beach. To prevent this from happening you must keep your key fob clear of moisture and away from water.
Water Damage
If your key fob becomes wet in water, whether you dropped it into the pool or fumbled it into a puddle don't think it's a case of lost cause. The key fob is protected by rubber seals, but prolonged exposure to water could affect the electronic chip. Water is a good conductor and any water that is absorbed into the key fob can cause the short circuits to be in series which can eventually harm the electronic chip. After taking the batteries out, clean its contacts with isopropyl and then dry them completely before putting them back in.
A dead battery may be the reason that your Peugeot 308 won't start. If you have an extra car, jumper cables can be used to get the engine running again. If the battery is causing the problem, it will need to be replaced.
Another possibility is a malfunctioning receiver in the vehicle, which can hinder it from receiving a signal from the key fob. peugeot replacement key G28 could be damaged or there could be an issue with the antenna, wiring, or the key fob itself. If you are using an entirely new key fob, it could need to be programmed to your vehicle. If you are unable solve the issue, contact an expert technician. A technician trained in the field will be able to diagnose the problem quickly, and fix the issue immediately.
Radio Interference
Interference can result in symptoms such as a key fob that isn't recognized or has a restricted range. This is either radiated or conducted, with the former resultant from power supply cables and speaker wiring passing too close to electrical components. In general, rerouting cables or moving them away from these components will resolve the issue.
It's unlikely that someone is watching your key fob's signals to take your car away, but it's possible that the signal has been muffled by radio frequency interference. This is a simple issue to solve.
If your key fob not being recognized, try using a new battery. Make sure that the battery is the right size and type. A wrongly sized battery can cause damage to the fob.
These devices could interfere with the key signal if they operate on the same radio frequency. It is best to avoid having these devices attached to your key fob.
Pairing Issues
A car's remote keyless entry system includes an antenna that receives radio frequency signals from the key fob. If the receiver is experiencing an issue, you will not be capable of starting your car even if the key fob works and is reprogrammed. This issue can be caused by a variety of ways, including by an inoperative battery on the coin-cell or water damage. The receiver may also be malfunctioning due to a software glitch or internal damage in the key.
The battery for your coin in your Peugeot 308 keyfob may have died. This battery can be replaced, but you need to be sure it's the proper battery for your key fob. It is best to use one that is the same size with the same voltage, specifications, and specifications as the original.
Your Peugeot 308 keyfob may not work if it has been linked to a different vehicle. This can happen if have given your key fob to a person you know or if the key has been used to unlock and start other vehicles. This can be fixed by reprogramming your key fob with an OBDII scan. This tool typically asks you for certain information regarding your vehicle, like the VIN or engine type, so it's essential to enter this correctly.